Skip to content
World Cord Sets

Power cords for Bosnia and Herzegovina

Beta

125 power cords for Bosnia and Herzegovina: the Schuko CEE 7/4 (Type F) plug, 230 V 50 Hz mains, BiH Conformity Mark; CE accepted as supporting evidence required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

Power in Bosnia and Herzegovina

Mains supply
230 V · 50 Hz
also 400 V
Wall plug
Schuko CEE 7/4 (Type F)16 A · 250 V

Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Bosnia and Herzegovina requires BiH Conformity Mark; CE accepted as supporting evidence, overseen by AZNT (Agencija za nadzor nad tržištem BiH) under Naredba (Sl. glasnik BiH 64/2017; LVD-aligned).
Regulator: AZNT (Agencija za nadzor nad tržištem BiH)
Our cords approved for Bosnia and Herzegovina carry: CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed), VDE Mark.

Cord-set standard: BAS EN 60320-1; BAS EN 60799. Cordage accepted: H05VV-F, H05RN-F. Labels in BS / HR / SR.

Bosnia and Herzegovina wall plug to IEC 60320 power cords

See all 17 country plug cords product lines →

The wall plug used in Bosnia and Herzegovina on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Bosnia and Herzegovina, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Bosnia and Herzegovina requires.

Showing 12 of 17 product lines · see all country plug cords cords for Bosnia and Herzegovina

Data center power cords for Bosnia and Herzegovina

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Bosnia and Herzegovina requires, so a data center operator deploys the same cord in every region.

Not on the record for Bosnia and Herzegovina yet

  • Industrial cords — IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

We list a cord here only when our certification record shows it is approved for use in Bosnia and Herzegovina or needs no national approval there. Need one of these kinds for Bosnia and Herzegovina? Ask us — we quote the cord and file the approval.

Questions about power cords for Bosnia and Herzegovina

What plug type does Bosnia and Herzegovina use?

Bosnia and Herzegovina uses the Schuko CEE 7/4 (Type F) plug. Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike. Plug ratings: CEE 7/4 Schuko 16 A · 250 V.

What is the mains voltage in Bosnia and Herzegovina?

230 V at 50 Hz (also 400 V). Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Bosnia and Herzegovina?

Bosnia and Herzegovina requires BiH Conformity Mark; CE accepted as supporting evidence, overseen by AZNT (Agencija za nadzor nad tržištem BiH) under Naredba (Sl. glasnik BiH 64/2017; LVD-aligned). A cord marked "Approved for use in Bosnia and Herzegovina" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Bosnia and Herzegovina?

Yes — 87 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Bosnia and Herzegovina or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which certification marks do your cords for Bosnia and Herzegovina carry?

Our cords approved for use in Bosnia and Herzegovina carry CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed) and VDE Mark on the record. Every product page lists that cord's own approvals, and we can supply the certificate behind any of them.

Which cordage types are accepted in Bosnia and Herzegovina?

H05VV-F and H05RN-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Europe

"Approved for use in Bosnia and Herzegovina" means the cord carries the approval Bosnia and Herzegovina requires for its type. "No national approval required in Bosnia and Herzegovina" means Bosnia and Herzegovina names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.