Skip to content
World Cord Sets

Power cords for Croatia

Beta

125 power cords for Croatia: the Schuko CEE 7/4 (Type F) plug, 230 V 50 Hz mains, CE (mandatory) required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

Power in Croatia

Mains supply
230 V · 50 Hz
also 400 V
Eurozone member 2023.
Wall plug
Schuko CEE 7/4 (Type F)16 A · 250 V

Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Find a cord for Continental Europe →
Approvals
Croatia requires CE (mandatory), overseen by Državni inspektorat under Pravilnik (NN 88/2016; transposes LVD).
Regulator: Državni inspektorat
Our cords approved for Croatia carry: CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed), VDE Mark.

Cord-set standard: HRN EN 60320-1; HRN EN 60799. Cordage accepted: H05VV-F, H05RN-F. Labels in HR.

Croatia wall plug to IEC 60320 power cords

See all 17 country plug cords product lines →

The wall plug used in Croatia on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Croatia, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Croatia requires.

Showing 12 of 17 product lines · see all country plug cords cords for Croatia

Data center power cords for Croatia

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Croatia requires, so a data center operator deploys the same cord in every region.

Not on the record for Croatia yet

  • Industrial cords — IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

We list a cord here only when our certification record shows it is approved for use in Croatia or needs no national approval there. Need one of these kinds for Croatia? Ask us — we quote the cord and file the approval.

Questions about power cords for Croatia

What plug type does Croatia use?

Croatia uses the Schuko CEE 7/4 (Type F) plug. Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike. Plug ratings: CEE 7/4 Schuko 16 A · 250 V.

What is the mains voltage in Croatia?

230 V at 50 Hz (also 400 V). Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Croatia?

Croatia requires CE (mandatory), overseen by Državni inspektorat under Pravilnik (NN 88/2016; transposes LVD). A cord marked "Approved for use in Croatia" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Croatia?

Yes — 87 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Croatia or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which certification marks do your cords for Croatia carry?

Our cords approved for use in Croatia carry CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed) and VDE Mark on the record. Every product page lists that cord's own approvals, and we can supply the certificate behind any of them.

Which cordage types are accepted in Croatia?

H05VV-F and H05RN-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Europe

"Approved for use in Croatia" means the cord carries the approval Croatia requires for its type. "No national approval required in Croatia" means Croatia names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.