Skip to content
World Cord Sets

Power cords for Czech Republic

Beta

125 power cords for Czech Republic: the Schuko CEE 7/4 (Type F) and CEE 7/5 (Type E) plugs, 230 V 50 Hz mains, CE (mandatory); voluntary ESČ mark (EZÚ) required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

Power in Czech Republic

Mains supply
230 V · 50 Hz
also 400 V
Growing data-center cluster (Prague).
Wall plug
Schuko CEE 7/4 (Type F)16 A · 250 V

Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike.

CEE 7/5 (Type E)16 A · 250 V

Earth by a pin in the socket. The CEE 7/7 hybrid plug fits both Type E and Type F sockets.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Find a cord for Continental Europe →
Approvals
Czech Republic requires CE (mandatory); voluntary ESČ mark (EZÚ), overseen by Česká obchodní inspekce (ČOI) under Nařízení vlády č. 118/2016 Sb. (transposes LVD).
Regulator: Česká obchodní inspekce (ČOI)
Our cords approved for Czech Republic carry: CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed), VDE Mark.

Cord-set standard: ČSN EN 60320-1; ČSN EN 60799. Cordage accepted: H05VV-F, H05VVH2-F, H05RN-F. Labels in Czech.

Czech Republic wall plug to IEC 60320 power cords

See all 17 country plug cords product lines →

The wall plug used in Czech Republic on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Czech Republic, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Czech Republic requires.

Showing 12 of 17 product lines · see all country plug cords cords for Czech Republic

Data center power cords for Czech Republic

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Czech Republic requires, so a data center operator deploys the same cord in every region.

Not on the record for Czech Republic yet

  • Industrial cords — IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

We list a cord here only when our certification record shows it is approved for use in Czech Republic or needs no national approval there. Need one of these kinds for Czech Republic? Ask us — we quote the cord and file the approval.

Questions about power cords for Czech Republic

What plug type does Czech Republic use?

Czech Republic uses the Schuko CEE 7/4 (Type F) and CEE 7/5 (Type E) plugs. Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike. Earth by a pin in the socket. The CEE 7/7 hybrid plug fits both Type E and Type F sockets. Plug ratings: CEE 7/4 Schuko 16 A · 250 V; CEE 7/5 16 A · 250 V.

What is the mains voltage in Czech Republic?

230 V at 50 Hz (also 400 V). Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Czech Republic?

Czech Republic requires CE (mandatory); voluntary ESČ mark (EZÚ), overseen by Česká obchodní inspekce (ČOI) under Nařízení vlády č. 118/2016 Sb. (transposes LVD). A cord marked "Approved for use in Czech Republic" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Czech Republic?

Yes — 87 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Czech Republic or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which certification marks do your cords for Czech Republic carry?

Our cords approved for use in Czech Republic carry CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed) and VDE Mark on the record. Every product page lists that cord's own approvals, and we can supply the certificate behind any of them.

Which cordage types are accepted in Czech Republic?

H05VV-F, H05VVH2-F and H05RN-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Europe

"Approved for use in Czech Republic" means the cord carries the approval Czech Republic requires for its type. "No national approval required in Czech Republic" means Czech Republic names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.