Skip to content
World Cord Sets

Power cords for North Macedonia

Beta

125 power cords for North Macedonia: the Schuko CEE 7/4 (Type F) plug, 230 V 50 Hz mains, North Macedonian Conformity Mark; CE accepted as evidence (EU candidate alignment) required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

Power in North Macedonia

Mains supply
230 V · 50 Hz
also 400 V
Wall plug
Schuko CEE 7/4 (Type F)16 A · 250 V

Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
North Macedonia requires North Macedonian Conformity Mark; CE accepted as evidence (EU candidate alignment), overseen by DPI (Държавен пазарен инспекторат) under Правилник (Сл. весник 88/2016; LVD-aligned).
Regulator: DPI (Държавен пазарен инспекторат)
Our cords approved for North Macedonia carry: CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed), VDE Mark.

Cord-set standard: МКС EN 60320-1; МКС EN 60799. Cordage accepted: H05VV-F, H05RN-F. Labels in MK.

North Macedonia wall plug to IEC 60320 power cords

See all 17 country plug cords product lines →

The wall plug used in North Macedonia on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into North Macedonia, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval North Macedonia requires.

Showing 12 of 17 product lines · see all country plug cords cords for North Macedonia

Data center power cords for North Macedonia

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks North Macedonia requires, so a data center operator deploys the same cord in every region.

Not on the record for North Macedonia yet

  • Industrial cords — IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

We list a cord here only when our certification record shows it is approved for use in North Macedonia or needs no national approval there. Need one of these kinds for North Macedonia? Ask us — we quote the cord and file the approval.

Questions about power cords for North Macedonia

What plug type does North Macedonia use?

North Macedonia uses the Schuko CEE 7/4 (Type F) plug. Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike. Plug ratings: CEE 7/4 Schuko 16 A · 250 V.

What is the mains voltage in North Macedonia?

230 V at 50 Hz (also 400 V). Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in North Macedonia?

North Macedonia requires North Macedonian Conformity Mark; CE accepted as evidence (EU candidate alignment), overseen by DPI (Държавен пазарен инспекторат) under Правилник (Сл. весник 88/2016; LVD-aligned). A cord marked "Approved for use in North Macedonia" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for North Macedonia?

Yes — 87 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in North Macedonia or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which certification marks do your cords for North Macedonia carry?

Our cords approved for use in North Macedonia carry CE Marking, ENEC Mark (European Norms Electrical Certification), KEMA-KEUR, NEMKO Mark, OVE Mark, SEMKO Mark, UKCA (UK Conformity Assessed) and VDE Mark on the record. Every product page lists that cord's own approvals, and we can supply the certificate behind any of them.

Which cordage types are accepted in North Macedonia?

H05VV-F and H05RN-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Europe

"Approved for use in North Macedonia" means the cord carries the approval North Macedonia requires for its type. "No national approval required in North Macedonia" means North Macedonia names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.