Skip to content
World Cord Sets

Power cords for US Virgin Islands

Beta

2,159 power cords for US Virgin Islands: 110 V 60 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,159 of these need no national approval in US Virgin Islands.

Power in US Virgin Islands

Mains supply
110 V · 60 Hz
Type A/B (NEMA). US territory OUTSIDE the US customs territory (19 CFR 101.1) — own 6% customs duty on non-US-origin goods; federal product-safety law applies.
Wall plug
Plug type not on our record yet — the IEC 60320 jumpers below fit any PDU or power-supply inlet.
Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
US Virgin Islands names no mandatory product approval for a cord set, overseen by US federal regime: OSHA (29 CFR 1910.303 — private sector under federal OSHA; VI State Plan covers public employees only); CPSC (CPSA 'State' includes the Virgin Islands); DPNR Division of Permits ado; standard export papers apply.
Regulator: US federal regime: OSHA (29 CFR 1910.303 — private sector under federal OSHA; VI State Plan covers public employees only); CPSC (CPSA 'State' includes the Virgin Islands); DPNR Division of Permits ado

Cord-set standard: UL 817 (cULus listing); NEC 110.3(B) listed-equipment practice. Cordage accepted: SJT (UL 62, UL-listed), SVT / SJTW (UL-listed). Labels in English.

US Virgin Islands wall plug to IEC 60320 power cords

The wall plug used in US Virgin Islands on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into US Virgin Islands, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval US Virgin Islands requires.

Data center power cords for US Virgin Islands

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks US Virgin Islands requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for US Virgin Islands

Industrial power cords for US Virgin Islands

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for US Virgin Islands

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in US Virgin Islands.

Showing 12 of 28 product lines · see all other cords cords for US Virgin Islands

Questions about power cords for US Virgin Islands

What is the mains voltage in US Virgin Islands?

110 V at 60 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in US Virgin Islands?

US Virgin Islands names no mandatory product approval for a cord set, overseen by US federal regime: OSHA (29 CFR 1910.303 — private sector under federal OSHA; VI State Plan covers public employees only); CPSC (CPSA 'State' includes the Virgin Islands); DPNR Division of Permits ado; standard export papers apply. A cord marked "Approved for use in US Virgin Islands" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for US Virgin Islands?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in US Virgin Islands or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in US Virgin Islands?

SJT (UL 62, UL-listed) and SVT / SJTW (UL-listed). Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Americas

"Approved for use in US Virgin Islands" means the cord carries the approval US Virgin Islands requires for its type. "No national approval required in US Virgin Islands" means US Virgin Islands names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.