Skip to content
World Cord Sets

Black 15A C14 to C15 2x SPLITTER Power Cords

15 Amps250 voltsC142X C15RoHSULcUL

Reference guide:IEC 60320 connector guide →

4

configurations

Not sure which cord you need?

Answer a few quick questions and we’ll narrow it down for you.

Match by picture

About Black 15A C14 to C15 2x SPLITTER Power Cords

IEC 60320 15A C14 to C15 2x Splitter (Y-cord) Power Cords are available are rated 250 volts. The C14 C15 Splitter Cords are typically used to connect from a PDU to multiple servers/routers/switches when you have more servers than PDU outlets. Contact us if you require custom length splitter cords or a different color.

The plugs and connectors in this collection

What each end is, what it mates with, and where to find every cord built on it.

  • IEC 60320 C14 plug

    Plug · IEC 60320

    IEC 60320 C14

    • 15 Amps
    • 250 volts

    On 4 of the cords here

    The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.

    Mates with IEC 60320 C13 Outlet

    Shop all IEC 60320 C14 C13 Power Cords →
  • 2X IEC 60320 C15

    Connector

    2X IEC 60320 C15

    • 15 Amps
    • 125/250V

    On 4 of the cords here

    The IEC 60320 C15 2x splitter configuration is a 1 to 2 adapter that converts 1 power source into 2 IEC320 C15 connectors to plug in multiple devices. The set is collectively rated for 250VAC and 15 Amps.

    Mates with IEC 60320 C16 Inlet

    You are on the 2X IEC 60320 C15 family page.

About Black 15A C14 to C15 2x SPLITTER Power Cords

General Information about C14 to C15 Splitter Power Cord Sets

C14 to C15 Power Cord sets are used to connect one C13 outlet, typically found on a Power Distribution Unit (PDU) to  2 C16 inlets, typically found on high end IT equipment. The C15 female connector will also mate with C14 inlets. Our C14 to C15 splitter cord sets come standard with 14awg conductors covered in a robust SJT outer jacket in lengths 2FT, 3FT, 4FT, and 6FT. However, we have the capability to custom produce any length required, and in any volume. 

Current rating

15 Amps

Voltage rating

250 volts

Plug (male end)

IEC 60320 C14

Connector (female end)

2X IEC 60320 C15

Certifications & compliance

  • RoHS
  • UL
  • cUL
  • Every cord we build is hi-pot tested
  • Same-day shipping by 2:30 PM ET
  • NET 30/60/90 for approved accounts
  • In-house engineering and compliance support

Frequently asked questions

What certifications do these power cords carry?
UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
Do you require a minimum order quantity?
No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
Can I get a custom length or color?
Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
How fast does this ship?
In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.