Skip to content
World Cord Sets

Power cords for Fiji

Beta

2,168 power cords for Fiji: the AS/NZS 3112 (Type I) plug, 240 V 50 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,168 of these need no national approval in Fiji.

Power in Fiji

Mains supply
240 V · 50 Hz
Electricity Regulations 2019 reg 5–6: single-phase 240 V, 3-phase 415/240 V, 50 Hz ±2%. Type I (AS/NZS 3112) sockets.
Wall plug
AS/NZS 3112 (Type I)10 A · 250 V

Flat angled pins with an earth pin; 10 A is the everyday rating, 15 A plugs carry a wider earth pin.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Fiji names no mandatory product approval for a cord set, overseen by Fijian Competition and Consumer Commission (FCCC) — appointed Regulator under the Electricity Act 2017 (Electricity Regulations 2019, reg 3); standard export papers apply.
Regulator: Fijian Competition and Consumer Commission (FCCC) — appointed Regulator under the Electricity Act 2017 (Electricity Regulations 2019, reg 3)

Cord-set standard: No Fiji standard for cord sets or appliance couplers found. Installations follow AS/NZS 3000:2018 (Wiring Rules, reg 3); reg 45 requires wires/fittings/equipment to meet Standards Australia specifications, else BSI. AS/NZS 60320.1 / AS/NZS 3191 evidence is the practical benchmark.. Cordage accepted: AS/NZS 3191 flexible cord, H05VV-F (HAR), SJT (accepted in practice with UL listing; not a Fiji-recognised type). Labels in English.

Fiji wall plug to IEC 60320 power cords

The wall plug used in Fiji on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Fiji, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Fiji requires.

Data center power cords for Fiji

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Fiji requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Fiji

Industrial power cords for Fiji

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Fiji

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Fiji.

Showing 12 of 28 product lines · see all other cords cords for Fiji

Questions about power cords for Fiji

What plug type does Fiji use?

Fiji uses the AS/NZS 3112 (Type I) plug. Flat angled pins with an earth pin; 10 A is the everyday rating, 15 A plugs carry a wider earth pin. Plug ratings: AS/NZS 3112 10 A · 250 V.

What is the mains voltage in Fiji?

240 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Fiji?

Fiji names no mandatory product approval for a cord set, overseen by Fijian Competition and Consumer Commission (FCCC) — appointed Regulator under the Electricity Act 2017 (Electricity Regulations 2019, reg 3); standard export papers apply. A cord marked "Approved for use in Fiji" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Fiji?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Fiji or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Fiji?

AS/NZS 3191 flexible cord, H05VV-F (HAR) and SJT (accepted in practice with UL listing; not a Fiji-recognised type). Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Asia-Pacific

"Approved for use in Fiji" means the cord carries the approval Fiji requires for its type. "No national approval required in Fiji" means Fiji names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.