Skip to content
World Cord Sets

Power cords for Kiribati

Beta

2,168 power cords for Kiribati: the AS/NZS 3112 (Type I) plug, 240 V 50 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,168 of these need no national approval in Kiribati.

Power in Kiribati

Mains supply
240 V · 50 Hz
240 V (some sources 230/400 V) 50 Hz, Type I (AS/NZS 3112) plugs; Public Utilities Board supplies South Tarawa.
Wall plug
AS/NZS 3112 (Type I)10 A · 250 V

Flat angled pins with an earth pin; 10 A is the everyday rating, 15 A plugs carry a wider earth pin.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Kiribati names no mandatory product approval for a cord set, overseen by No electrical-product safety regulator identified. Public Utilities Board (Public Utilities Ordinance Cap 83) supplies electricity; Kiribati Customs Service (Comptroller of Customs) administers the Cu; standard export papers apply.
Regulator: No electrical-product safety regulator identified. Public Utilities Board (Public Utilities Ordinance Cap 83) supplies electricity; Kiribati Customs Service (Comptroller of Customs) administers the Cu

Cord-set standard: None adopted; AS/NZS 60320.1 / IEC 60320-1 (RCM) evidence is the practical benchmark. PUB Ordinance Cap 83 governs supply, not appliances.. Cordage accepted: AS/NZS 3191 flexible cord, H05VV-F (HAR) — accepted in practice, SJT (UL) — no formal standing. Labels in English.

Kiribati wall plug to IEC 60320 power cords

The wall plug used in Kiribati on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Kiribati, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Kiribati requires.

Data center power cords for Kiribati

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Kiribati requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Kiribati

Industrial power cords for Kiribati

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Kiribati

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Kiribati.

Showing 12 of 28 product lines · see all other cords cords for Kiribati

Questions about power cords for Kiribati

What plug type does Kiribati use?

Kiribati uses the AS/NZS 3112 (Type I) plug. Flat angled pins with an earth pin; 10 A is the everyday rating, 15 A plugs carry a wider earth pin. Plug ratings: AS/NZS 3112 10 A · 250 V.

What is the mains voltage in Kiribati?

240 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Kiribati?

Kiribati names no mandatory product approval for a cord set, overseen by No electrical-product safety regulator identified. Public Utilities Board (Public Utilities Ordinance Cap 83) supplies electricity; Kiribati Customs Service (Comptroller of Customs) administers the Cu; standard export papers apply. A cord marked "Approved for use in Kiribati" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Kiribati?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Kiribati or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Kiribati?

AS/NZS 3191 flexible cord, H05VV-F (HAR) — accepted in practice and SJT (UL) — no formal standing. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Asia-Pacific

"Approved for use in Kiribati" means the cord carries the approval Kiribati requires for its type. "No national approval required in Kiribati" means Kiribati names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.