Skip to content
World Cord Sets

Power cords for Nauru

Beta

2,168 power cords for Nauru: the AS/NZS 3112 (Type I) plug, 240 V 50 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,168 of these need no national approval in Nauru.

Power in Nauru

Mains supply
240 V · 50 Hz
240/415 V 50 Hz, Type I (AS/NZS 3112) plugs; Nauru Utilities Corporation (state-owned) supplies power and adopted AS/NZS 3000:2007 as its wiring standard (ADB/PRIF 2011).
Wall plug
AS/NZS 3112 (Type I)10 A · 250 V

Flat angled pins with an earth pin; 10 A is the everyday rating, 15 A plugs carry a wider earth pin.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Nauru names no mandatory product approval for a cord set, overseen by No electrical-product safety regulator identified. Nauru Utilities Corporation (SOE) applies AS/NZS 3000; Nauru Customs Office (Department of Finance) administers the Customs Act 2014 / Customs Tariff; standard export papers apply.
Regulator: No electrical-product safety regulator identified. Nauru Utilities Corporation (SOE) applies AS/NZS 3000; Nauru Customs Office (Department of Finance) administers the Customs Act 2014 / Customs Tariff

Cord-set standard: None adopted for cord sets; AS/NZS 60320.1 / IEC 60320-1 (RCM) evidence is the practical benchmark under an AS/NZS 3000 regime.. Cordage accepted: AS/NZS 3191 flexible cord, H05VV-F (HAR) — accepted in practice, SJT (UL) — no formal standing. Labels in English.

Nauru wall plug to IEC 60320 power cords

The wall plug used in Nauru on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Nauru, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Nauru requires.

Data center power cords for Nauru

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Nauru requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Nauru

Industrial power cords for Nauru

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Nauru

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Nauru.

Showing 12 of 28 product lines · see all other cords cords for Nauru

Questions about power cords for Nauru

What plug type does Nauru use?

Nauru uses the AS/NZS 3112 (Type I) plug. Flat angled pins with an earth pin; 10 A is the everyday rating, 15 A plugs carry a wider earth pin. Plug ratings: AS/NZS 3112 10 A · 250 V.

What is the mains voltage in Nauru?

240 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Nauru?

Nauru names no mandatory product approval for a cord set, overseen by No electrical-product safety regulator identified. Nauru Utilities Corporation (SOE) applies AS/NZS 3000; Nauru Customs Office (Department of Finance) administers the Customs Act 2014 / Customs Tariff; standard export papers apply. A cord marked "Approved for use in Nauru" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Nauru?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Nauru or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Nauru?

AS/NZS 3191 flexible cord, H05VV-F (HAR) — accepted in practice and SJT (UL) — no formal standing. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Asia-Pacific

"Approved for use in Nauru" means the cord carries the approval Nauru requires for its type. "No national approval required in Nauru" means Nauru names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.