Black NACC Power Whip IEC320 C14 to Open Ended 2" ROJ 1/4" Strip 15A 250V
Reference guide:IEC 60320 connector guide →
7
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
Made to orderColor — Black
Length — 3 Feet
About Black NACC Power Whip IEC320 C14 to Open Ended 2" ROJ 1/4" Strip 15A 250V
The open end of a power supply cord is hard wired to another device, providing power either to our from that device. Unless otherwise noted, our power supply cords come standard with a 2" ROJ (Remove Outer Jacket) and a 1/4" Strip. The ROJ length determines the length of the individual conductors, and the Strip length determines the amount of copper exposed on the end of each conductor. If you require a custom ROJ or Strip length, please don't hesitate to reach out to us.
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Plug · IEC 60320
IEC 60320 C14
- 15 Amps
- 250 volts
On 7 of the cords here
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Mates with IEC 60320 C13 Outlet
About Black NACC Power Whip IEC320 C14 to Open Ended 2" ROJ 1/4" Strip 15A 250V
More information about 15A 14/3 SJT C14 to Open Ended Power Supply Cords
C14 to Open Ended (Also known as Hard Wired ROJ Device Cords) are used to connect a C13 outlet to a device with hard wire terminals. These are commonly found in industrial equipment, or, used by OEM's when assembling products. Our C14 to Open Ended power supply cords come standard with a 2" ROJ (Remove Outer Jacket, also known as Outer Strip Length) and a 1/4" Strip on the conductors (also known as the "Inners"). If you require a different ROJ or Strip length please reach out to us for a quote.
Our 15A C14 to Open power supply cords utilize 14/3 SJT(O)(OW)(OOW) cordage. If you require a specific cordage, please contact us for a custom quote. We offer same day turn around on most custom requests, and typically a maximum of a 2-3 week lead time for non-standard requests.
Current rating
15 Amps
Voltage rating
250 volts
Plug (male end)
IEC 60320 C14
Certifications & compliance
- UL
- cUL
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.