Black Standard NEMA 6-15P to IEC320 C15 15A 250V
Reference guide:IEC 60320 connector guide →
2
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
In stock (256)Color — Black
Length — 6 Feet
About Black Standard NEMA 6-15P to IEC320 C15 15A 250V
15 AMP 250V (208V) NEMA 6-15P to C15 Power Cords are available in many STANDARD lengths. Standard jacket type is SJT(OW). Standard jacket color is BLACK. A NEMA 6-15P mates with a NEMA 6-15R wall outlet or receptacle. An IEC 60320 (320) C-15 mates with a C-14 or C-16 INLET or PLUG. C15 Connector is a HIGH-TEMPERATURE version of the C13. Other jacket types are available upon request: SVT, SPT, SJ, SJO, SJOW, SJOOW, S, SO, SOW, SOOW. LSZH (Low Smoke Zero Halogen) cords are available upon request. SJT-R jacket for heater applications is available upon request. Other colors available are white, gray, blue, green, red, yellow, orange.
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Connector · IEC 60320
IEC 60320 C15
- 15 Amps
- 125/250V
On 2 of the cords here
The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.
Mates with IEC 60320 C16 Inlet
Plug · NEMA
NEMA 6-15P
- 15 Amps
- 250 volts
On 2 of the cords here
The NEMA 6-15P is a 3 Wire grounded plug featuring two blades and a ground pin, rated up to 250V AC and 15 Amps. The NEMA 6-15P has two, horizontal blades on the top of the plug spaced 23⁄32" center to center and a ground pin spaced between the two on the bottom of the plug.
Mates with NEMA 6-15R Outlet
About Black Standard NEMA 6-15P to IEC320 C15 15A 250V
NEMA 6-15P
The NEMA 6-15P is a 3 Wire grounded plug featuring two blades and a ground pin, rated up to 250V AC and 15 Amps. The NEMA 6-15P has two, horizontal blades on the top of the plug spaced 23⁄32" center to center and a ground pin spaced between the two on the bottom of the plug.
IEC 60320 C15 Connector (Female)
The IEC 60320 C15 is a grounded 3 Wire connector rated up to 250V & 10 Amps Internationally and 125V/250V & 15 Amps in North America. The C15 mates with a C16 inlet as well as a C14 Inlet and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C15 is a HIGH TEMPERATURE connector rated up to 120°C, unlike the 70°C rating of the C13. The C15 is commonly used in in electric kettles and other household appliances that involve higher temperatures than a normal C13 is made to withstand.
Typical Applications of NEMA 6-15P to IEC 60320 C15 Power Cables
NEMA 6-15P to C15 power cables are used to connect a NEMA 6-15R outlet to a C16 inlet on a device such as a server. These are commonly used in bitcoin mining operations.
Current rating
15 Amps
Voltage rating
250 volts
Plug (male end)
NEMA 6-15P
Connector (female end)
IEC 60320 C15
Certifications & compliance
- RoHS
- UL
- cUL
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.