52
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
Made to orderColor — Black
Length — 1 Foot
Made to orderColor — Black
Length — 1 Foot
Made to orderColor — Black
Length — 1 Foot
Made to orderColor — Black
Length — 1 Foot
About Angled C14 C15 Power Cords
Angled C14 to C15 power cables are used with space limitation require an angled connection either on the PDU or on the equipment. Often found in data centers or used in OEM
Looking for another cordage, color, angle, or ampere rating? See out our main IEC 60320 C14 to C15 Power Cord page!
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Connector · IEC 60320
IEC 60320 C15
- 15 Amps
- 125/250V
On 26 of the cords here (50%)
The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.
Mates with IEC 60320 C16 Inlet
Plug · IEC 60320
IEC 60320 C14
- 15 Amps
- 250 volts
On 26 of the cords here (50%)
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Mates with IEC 60320 C13 Outlet
Plug · IEC 60320
IEC 60320 C14 - LEFT ANGLE
- 15 Amps
- 125/250V
On 13 of the cords here (25%)
The LEFT ANGLE refers to the cord orientation relative to the plug face, refer to the diagram. When looking at the back of the connector (as if plugged in) the cord will exit left. The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Mates with IEC 60320 C13 Outlet
Plug · IEC 60320
IEC 60320 C14 - RIGHT ANGLE
- 15 Amps
- 125/250V
On 13 of the cords here (25%)
The RIGHT ANGLE refers to the cord orientation relative to the plug face, refer to the diagram. When looking at the back of the connector (as if plugged in) the cord will exit right. The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Mates with IEC 60320 C13 Outlet
Connector · IEC 60320
IEC 60320 C15 Right Angle
- 15 Amps
- 125/250V
On 13 of the cords here (25%)
The RIGHT ANGLE refers to the cord orientation relative to the connector face, refer to the diagram. When looking at the back of the connector (as if plugged in) the cord will exit right. The IEC 60320 C15 (female) is a grounded 3 Wire connector rated up to 250V & 10 Amps Internationally and 125V/250V & 15 Amps in North America. The C15 mates with a C16 inlet as well as a C14 Inlet and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C15 is a HIGH TEMPERATURE connector rated up to 120°C, unlike the 70°C rating of the C13. The C15 is commonly used in in electric kettles and other household appliances that involve higher temperatures than a normal C13 is made to withstand.
Mates with IEC 60320 C16 Inlet
Connector · IEC 60320
IEC 60320 C15 Left Angle
- 15 Amps
- 125/250V
On 13 of the cords here (25%)
The LEFT ANGLE refers to the cord orientation relative to the connector face, refer to the diagram. When looking at the back of the connector (as if plugged in) the cord will exit left. The IEC 60320 C15 (female) is a grounded 3 Wire connector rated up to 250V & 10 Amps Internationally and 125V/250V & 15 Amps in North America. The C15 mates with a C16 inlet as well as a C14 Inlet and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C15 is a HIGH TEMPERATURE connector rated up to 120°C, unlike the 70°C rating of the C13. The C15 is commonly used in in electric kettles and other household appliances that involve higher temperatures than a normal C13 is made to withstand.
Mates with IEC 60320 C16 Inlet
About Angled C14 C15 Power Cords
World Cord Sets supplies angled c14 c15 power cords from our East Windsor, Connecticut headquarters, with manufacturing across US and overseas facilities. Cords are tested and certified to spec before shipment. We stock 52+ configurations and build custom cords to order — hand-terminated builds from in-stock components typically ship in 3–4 business days. In-stock orders placed by 2:30 PM ET ship the same day from our Connecticut warehouse.
Current rating
15 Amps
Voltage rating
250 volts
Certifications & compliance
- RoHS
- UL
- cUL
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.