Black High Temp IEC320 C14 to IEC320 C15 15A 250V
Reference guide:IEC 60320 connector guide →
14
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
In stock (833)Color — Black
Length — 1 Foot
About Black High Temp IEC320 C14 to IEC320 C15 15A 250V
IEC 60320 15A C14 to C15 Black Power Cords are available in many standard stock lengths. The C15 is a HIGH TEMPERATURE connector. The maximum pin temperature of the appliance inlet is 120C for the C15. Standard color is black. Standard jacket type is SJT. Standard gauge is 14awg. Standard approvals are UL, CSA (c-UL-us).
Looking for another cordage, color, angle, or ampere rating? See out main IEC 60320 C14 to C15 Power Cord page!
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Connector · IEC 60320
IEC 60320 C15
- 15 Amps
- 125/250V
On 14 of the cords here
The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.
Mates with IEC 60320 C16 Inlet
Plug · IEC 60320
IEC 60320 C14
- 15 Amps
- 250 volts
On 14 of the cords here
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment.
Mates with IEC 60320 C13 Outlet
About Black High Temp IEC320 C14 to IEC320 C15 15A 250V
General Information about 15A C14 to C15 Power Cord Sets
Our 15A C14-C15 power cord sets are manufactured with 3 14awg conductors covered in a robust SJT outer jacket. C14 C15 power cord sets are commonly found in data centers and IT installations to provide power from a PDU with a C13 outlet, to a server, router, switch, or other IT device with a C16 inlet.
Our 15A C14-C15 power cord sets come in many different colors to make it simply to color code your installation. Many data centers choose to use colors to help identify the different circuits that are providing power to a specific rack. For example, RED power cords might be used to identify the primary circuit, and BLUE might be used to identify the second circuit. However, each data center and company have their own color coding methods.
World Cord Sets stocks 15A C14-C15 cord sets in many different standard stock lengths from 1FT - 15FT. However, the most common lengths are 3FT and 6FT.
Not what you're looking for?
Not what you are looking for? Please see below for alternative and similar options to our 10A C14 to C13 cord sets.
Looking for Angled C14 to C15 Cords?
Wrong Ampere/Gauge?
- 10A C14 to C13 Power Cord Sets - 10A C14 to C13 cord sets use 18awg SJT cordage.
Wrong Male End?
C20 to C15 Power Cord Sets - C20 to C15 cord sets are used to connect a C19 outlet to a C14 inlet.
Wrong Female End?
C14 to C5 Power Cord Sets - C14 to C5 cord sets are used to connect a C13 outlet to a C6 inlet. Rated either 2.5A or 10A
C14 to C7 Power Cord Sets - C14 to C17 cord sets are used to connect a C13 outlet to a C8 inlet. Rated 2.5A
C14 to C15 (similar to C13 but with a notch) Power Cord Sets - C14 to C15 cord sets are similar to a C14-C13 cord sets, differing only with a notch on the C15. These are available in 10A, 13A, or 15A configurations.
C14 to C19 Power Cord Sets - C14 to C19 cord sets are used to connect a C13 outlet to a C20 inlet. Rated at 15A with 14awg cordage.
C14 to C21 Power Cord Sets - C14 to C21 cord sets are used to connect a C13 outlet to a C22 inlet. Rated at 15A with 14awg cordage.
C14 to NEM 5-15R Power Cord Sets - C13 to NEMA 5-15R cord sets are used as an adapter to convert a C13 outlet to a NEMA 5-15R outlet.
Current rating
15 Amps
Voltage rating
250 volts
Plug (male end)
IEC 60320 C14
Connector (female end)
IEC 60320 C15
Certifications & compliance
- UL
- cUL
- RoHS
- REACH
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.