Skip to content
World Cord Sets

Power cords for Angola

Beta

2,159 power cords for Angola: 220 V 50 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,159 of these need no national approval in Angola.

Power in Angola

Mains supply
220 V · 50 Hz
Type C plugs (Portuguese heritage).
Wall plug
Plug type not on our record yet — the IEC 60320 jumpers below fit any PDU or power-supply inlet.
Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Angola names no mandatory product approval for a cord set, overseen by IANORQ (Instituto Angolano de Normalização e Qualidade) — formerly INA; standard export papers apply.
Regulator: IANORQ (Instituto Angolano de Normalização e Qualidade) — formerly INA

Cord-set standard: NA adoptions of IEC 60320-1 where issued; IEC direct fallback. Cordage accepted: H05VV-F, H03VV-F. Labels in Portuguese.

Angola wall plug to IEC 60320 power cords

The wall plug used in Angola on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Angola, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Angola requires.

Data center power cords for Angola

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Angola requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Angola

Industrial power cords for Angola

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Angola

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Angola.

Showing 12 of 28 product lines · see all other cords cords for Angola

Questions about power cords for Angola

What is the mains voltage in Angola?

220 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Angola?

Angola names no mandatory product approval for a cord set, overseen by IANORQ (Instituto Angolano de Normalização e Qualidade) — formerly INA; standard export papers apply. A cord marked "Approved for use in Angola" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Angola?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Angola or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Angola?

H05VV-F and H03VV-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Angola" means the cord carries the approval Angola requires for its type. "No national approval required in Angola" means Angola names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.