Skip to content
World Cord Sets

Power cords for Botswana

Beta

2,197 power cords for Botswana: the BS 1363 (Type G) and SANS 164 (Type M) plugs, 230 V 50 Hz mains, BOBS Standardization Mark / CoC under SCSR required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,197 of these need no national approval in Botswana.

Power in Botswana

Mains supply
230 V · 50 Hz
Type D/G/M plugs; SADC region.
Wall plug
BS 1363 (Type G)13 A · 250 V

A fused plug: the BS 1362 fuse inside the plug protects the cord — 13 A on cord sets, 3 A or 5 A on low-current C13 cords.

SANS 164 (Type M)16 A · 250 V

The large round-pin South African plug (16 A); the compact SANS 164-2 (Type N) is being phased in.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Find a cord for South Africa →
Approvals
Botswana requires BOBS Standardization Mark / CoC under SCSR, overseen by BOBS under Standards Act, 2014; SCSR.
Regulator: BOBS

Cord-set standard: BOS IEC 60320-1; BOS IEC 60799; BOS 164 (SANS-aligned). Cordage accepted: H05VV-F, H03VV-F, BS 6500. Labels in English.

Botswana wall plug to IEC 60320 power cords

See all 30 country plug cords product lines →

The wall plug used in Botswana on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Botswana, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Botswana requires.

Showing 12 of 30 product lines · see all country plug cords cords for Botswana

Data center power cords for Botswana

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Botswana requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Botswana

Industrial power cords for Botswana

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Botswana

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Botswana.

Showing 12 of 28 product lines · see all other cords cords for Botswana

Questions about power cords for Botswana

What plug type does Botswana use?

Botswana uses the BS 1363 (Type G) and SANS 164 (Type M) plugs. A fused plug: the BS 1362 fuse inside the plug protects the cord — 13 A on cord sets, 3 A or 5 A on low-current C13 cords. The large round-pin South African plug (16 A); the compact SANS 164-2 (Type N) is being phased in. Plug ratings: BS 1363 13 A · 250 V; SANS 164 16 A · 250 V.

What is the mains voltage in Botswana?

230 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Botswana?

Botswana requires BOBS Standardization Mark / CoC under SCSR, overseen by BOBS under Standards Act, 2014; SCSR. A cord marked "Approved for use in Botswana" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Botswana?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Botswana or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Botswana?

H05VV-F, H03VV-F and BS 6500. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Botswana" means the cord carries the approval Botswana requires for its type. "No national approval required in Botswana" means Botswana names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.