Skip to content
World Cord Sets

Power cords for Ghana

Beta

2,184 power cords for Ghana: the BS 1363 (Type G) plug, 230 V 50 Hz mains, G-CAP CoC; GSA Certification Mark (voluntary) required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,184 of these need no national approval in Ghana.

Power in Ghana

Mains supply
230 V · 50 Hz
Type D/G plugs (UK influence).
Wall plug
BS 1363 (Type G)13 A · 250 V

A fused plug: the BS 1362 fuse inside the plug protects the cord — 13 A on cord sets, 3 A or 5 A on low-current C13 cords.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Ghana requires G-CAP CoC; GSA Certification Mark (voluntary), overseen by GSA (Ghana Standards Authority) under Standards Authority Act, 1973 (NRCD 173); Standards Act, 2022 (Act 1078); G-CAP programme. Every shipment also carries G-CAP CoC.
Regulator: GSA (Ghana Standards Authority)

Cord-set standard: GS IEC 60320-1; GS IEC 60799; BS 1363 referenced. Cordage accepted: H05VV-F, H03VV-F, BS 6500. Labels in English.

Ghana wall plug to IEC 60320 power cords

See all 18 country plug cords product lines →

The wall plug used in Ghana on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Ghana, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Ghana requires.

Showing 12 of 18 product lines · see all country plug cords cords for Ghana

Data center power cords for Ghana

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Ghana requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Ghana

Industrial power cords for Ghana

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Ghana

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Ghana.

Showing 12 of 28 product lines · see all other cords cords for Ghana

Questions about power cords for Ghana

What plug type does Ghana use?

Ghana uses the BS 1363 (Type G) plug. A fused plug: the BS 1362 fuse inside the plug protects the cord — 13 A on cord sets, 3 A or 5 A on low-current C13 cords. Plug ratings: BS 1363 13 A · 250 V.

What is the mains voltage in Ghana?

230 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Ghana?

Ghana requires G-CAP CoC; GSA Certification Mark (voluntary), overseen by GSA (Ghana Standards Authority) under Standards Authority Act, 1973 (NRCD 173); Standards Act, 2022 (Act 1078); G-CAP programme. Every shipment also carries G-CAP CoC. A cord marked "Approved for use in Ghana" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Ghana?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Ghana or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Ghana?

H05VV-F, H03VV-F and BS 6500. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Ghana" means the cord carries the approval Ghana requires for its type. "No national approval required in Ghana" means Ghana names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.