Skip to content
World Cord Sets

Power cords for Morocco

Beta

2,196 power cords for Morocco: the Schuko CEE 7/4 (Type F) and CEE 7/5 (Type E) plugs, 220 V 50 Hz mains, VoC CoC; NM mark optional required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,196 of these need no national approval in Morocco.

Power in Morocco

Mains supply
220 V · 50 Hz
also 380 V
Type C/E plugs; CENELEC-aligned.
Wall plug
Schuko CEE 7/4 (Type F)16 A · 250 V

Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike.

CEE 7/5 (Type E)16 A · 250 V

Earth by a pin in the socket. The CEE 7/7 hybrid plug fits both Type E and Type F sockets.

Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Morocco requires VoC CoC; NM mark optional, overseen by IMANOR under Loi n° 24-09 sur la sécurité des produits et services; Arrêté conjoint sur le contrôle à l'importation. Every shipment also carries MA-VoC CoC.
Regulator: IMANOR

Cord-set standard: NM IEC 60320-1; NM IEC 60799; NM 06.4.030 (flexible cords). Cordage accepted: H05VV-F, H03VV-F, H05RN-F. Labels in French / Arabic.

Morocco wall plug to IEC 60320 power cords

See all 20 country plug cords product lines →

The wall plug used in Morocco on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Morocco, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Morocco requires.

Showing 12 of 20 product lines · see all country plug cords cords for Morocco

Data center power cords for Morocco

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Morocco requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Morocco

Industrial power cords for Morocco

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Morocco

See all 29 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Morocco.

Showing 12 of 29 product lines · see all other cords cords for Morocco

Questions about power cords for Morocco

What plug type does Morocco use?

Morocco uses the Schuko CEE 7/4 (Type F) and CEE 7/5 (Type E) plugs. Earth by side clips. The CEE 7/7 hybrid plug on most cords fits Schuko (Type F) and French (Type E) sockets alike. Earth by a pin in the socket. The CEE 7/7 hybrid plug fits both Type E and Type F sockets. Plug ratings: CEE 7/4 Schuko 16 A · 250 V; CEE 7/5 16 A · 250 V.

What is the mains voltage in Morocco?

220 V at 50 Hz (also 380 V). Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Morocco?

Morocco requires VoC CoC; NM mark optional, overseen by IMANOR under Loi n° 24-09 sur la sécurité des produits et services; Arrêté conjoint sur le contrôle à l'importation. Every shipment also carries MA-VoC CoC. A cord marked "Approved for use in Morocco" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Morocco?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Morocco or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Morocco?

H05VV-F, H03VV-F and H05RN-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Morocco" means the cord carries the approval Morocco requires for its type. "No national approval required in Morocco" means Morocco names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.