Skip to content
World Cord Sets

Power cords for Cameroon

Beta

2,159 power cords for Cameroon: 220 V 50 Hz mains, PECAE CoC required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,159 of these need no national approval in Cameroon.

Power in Cameroon

Mains supply
220 V · 50 Hz
Type C/E plugs; CFA Franc Zone (XAF).
Wall plug
Plug type not on our record yet — the IEC 60320 jumpers below fit any PDU or power-supply inlet.
Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Cameroon requires PECAE CoC, overseen by ANOR under Décret n° 2009/296; Arrêté n° 0023/MINMIDT instituant le PECAE. Every shipment also carries PECAE CoC.
Regulator: ANOR

Cord-set standard: NC adoptions of IEC 60320-1, IEC 60799. Cordage accepted: H05VV-F, H03VV-F. Labels in French / English.

Cameroon wall plug to IEC 60320 power cords

The wall plug used in Cameroon on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Cameroon, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Cameroon requires.

Data center power cords for Cameroon

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Cameroon requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Cameroon

Industrial power cords for Cameroon

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Cameroon

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Cameroon.

Showing 12 of 28 product lines · see all other cords cords for Cameroon

Questions about power cords for Cameroon

What is the mains voltage in Cameroon?

220 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Cameroon?

Cameroon requires PECAE CoC, overseen by ANOR under Décret n° 2009/296; Arrêté n° 0023/MINMIDT instituant le PECAE. Every shipment also carries PECAE CoC. A cord marked "Approved for use in Cameroon" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Cameroon?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Cameroon or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Cameroon?

H05VV-F and H03VV-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Cameroon" means the cord carries the approval Cameroon requires for its type. "No national approval required in Cameroon" means Cameroon names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.