Skip to content
World Cord Sets

Power cords for São Tomé and Príncipe

Beta

2,159 power cords for São Tomé and Príncipe: 230 V 50 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,159 of these need no national approval in São Tomé and Príncipe.

Power in São Tomé and Príncipe

Mains supply
230 V · 50 Hz
Type C / F sockets (Portuguese heritage).
Wall plug
Plug type not on our record yet — the IEC 60320 jumpers below fit any PDU or power-supply inlet.
Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
São Tomé and Príncipe names no mandatory product approval for a cord set, overseen by None — no national standards body; AGER (Autoridade Geral de Regulação) regulates telecoms/electricity sectors; DRCAE for commerce; standard export papers apply.
Regulator: None — no national standards body; AGER (Autoridade Geral de Regulação) regulates telecoms/electricity sectors; DRCAE for commerce

Cord-set standard: None — EN/IEC 60320-1, EN/IEC 60799 (Portuguese NP EN practice) fallback. Cordage accepted: H05VV-F, H03VV-F. Labels in Portuguese.

São Tomé and Príncipe wall plug to IEC 60320 power cords

The wall plug used in São Tomé and Príncipe on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into São Tomé and Príncipe, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval São Tomé and Príncipe requires.

Data center power cords for São Tomé and Príncipe

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks São Tomé and Príncipe requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for São Tomé and Príncipe

Industrial power cords for São Tomé and Príncipe

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for São Tomé and Príncipe

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in São Tomé and Príncipe.

Showing 12 of 28 product lines · see all other cords cords for São Tomé and Príncipe

Questions about power cords for São Tomé and Príncipe

What is the mains voltage in São Tomé and Príncipe?

230 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in São Tomé and Príncipe?

São Tomé and Príncipe names no mandatory product approval for a cord set, overseen by None — no national standards body; AGER (Autoridade Geral de Regulação) regulates telecoms/electricity sectors; DRCAE for commerce; standard export papers apply. A cord marked "Approved for use in São Tomé and Príncipe" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for São Tomé and Príncipe?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in São Tomé and Príncipe or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in São Tomé and Príncipe?

H05VV-F and H03VV-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in São Tomé and Príncipe" means the cord carries the approval São Tomé and Príncipe requires for its type. "No national approval required in São Tomé and Príncipe" means São Tomé and Príncipe names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.