Skip to content
World Cord Sets

Power cords for Sierra Leone

Beta

2,159 power cords for Sierra Leone: 230 V 50 Hz mains, no national approval required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

2,159 of these need no national approval in Sierra Leone.

Power in Sierra Leone

Mains supply
230 V · 50 Hz
Type D/G plugs (UK influence).
Wall plug
Plug type not on our record yet — the IEC 60320 jumpers below fit any PDU or power-supply inlet.
Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Sierra Leone names no mandatory product approval for a cord set, overseen by SLSB; standard export papers apply.
Regulator: SLSB

Cord-set standard: SLS adoptions of IEC 60320-1; BS standards referenced. Cordage accepted: H05VV-F, H03VV-F. Labels in English.

Sierra Leone wall plug to IEC 60320 power cords

The wall plug used in Sierra Leone on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Sierra Leone, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Sierra Leone requires.

Data center power cords for Sierra Leone

See all 114 data center cords product lines →

IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Sierra Leone requires, so a data center operator deploys the same cord in every region.

Showing 12 of 114 product lines · see all data center cords cords for Sierra Leone

Industrial power cords for Sierra Leone

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Sierra Leone

See all 28 other cords product lines →

Extension cords, splitters, hardwired whips and adapter cords approved for use in Sierra Leone.

Showing 12 of 28 product lines · see all other cords cords for Sierra Leone

Questions about power cords for Sierra Leone

What is the mains voltage in Sierra Leone?

230 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Sierra Leone?

Sierra Leone names no mandatory product approval for a cord set, overseen by SLSB; standard export papers apply. A cord marked "Approved for use in Sierra Leone" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Are IEC 60320 C13 / C14 jumper cords approved for Sierra Leone?

Yes — 2,027 data center cords (C14 or C20 into the PDU, C13 / C15 / C19 into the equipment) are approved for use in Sierra Leone or need no national approval there. For most countries these are our global cords: one part number carries the marks several countries require.

Which cordage types are accepted in Sierra Leone?

H05VV-F and H03VV-F. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Sierra Leone" means the cord carries the approval Sierra Leone requires for its type. "No national approval required in Sierra Leone" means Sierra Leone names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.