Standard IEC320 C20 to IEC320 C19 20A 250V
Reference guide:IEC 60320 connector guide →
111
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
In stock (1,483)Color — Black
Length — 1 Foot
- In stock (388)
Color — Black
Length — 5.0 meters
About Standard IEC320 C20 to IEC320 C19 20A 250V
IEC 60320 C20 to C19 20 amps 250 volts Power Cords are available in many standard stock lengths. Standard color is black. Standard jacket type is SJT. Standard gauge is 12awg but 14 awg is available (see C20 C19 15A). Standard approvals are UL, CSA (c-UL-us). Colors available are black, white, gray, blue, green, red, yellow, orange. Jacket types available are SJT, SJTO, SJTOW, SJTOOW, SVT, SJ, SJO, SJOW, SJOOW, H05VV-F, H05RN-F, H05RR-F. Shielded cords are available upon request. LSZH (Low Smoke Zero Halogen) PLENUM cords are available upon request.
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Connector · IEC 60320
IEC 60320 C19
- 20 Amps
- 125/250V
On 111 of the cords here
The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.
Mates with IEC 60320 C20 Inlet
Plug · IEC 60320
IEC 60320 C20
- 20 Amps
- 250 volts
On 111 of the cords here
The IEC 60320 C20 is a grounded 3 Wire Plug rated up to 250V and 20 Amps. The C20 mates with a C19 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C20 is in a jumper cable scenario, providing power from a PDU to a blade server chassis, high powered server, large network router, or similar device.
Mates with IEC 60320 C19 Outlet
About Standard IEC320 C20 to IEC320 C19 20A 250V
Information about 12awg-3c 20A 250V C20 to C19 Jumper Cords
C20 to C19 jumper cords are used to connect a C19 outlet to a C20 inlet. The C20 male plug on the cord set mates with the C19 female outlet on a PDU or other device. The C19 female connector on the cord set mates with the C20 inlet found on IT equipment.
12awg C20 to C19 jumper cords are rated for 250V and 20A, however, they can also be used in 125V circuits.
We stock IEC 320 C20/C19 jumper cords in many different colors and lengths to ensure we have the perfect length to fit in your rack, and the perfect color to make coloring coding your installation easy. Our primary colors are Black, Red, and Blue as these are the most common colors used in data centers.
Current rating
20 Amps
Voltage rating
250 volts
Plug (male end)
IEC 60320 C20
Connector (female end)
IEC 60320 C19
Certifications & compliance
- UL
- cUL
- RoHS
- REACH
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.