IEC 60320 C20 C19 ANGLED Power Cords
Reference guide:IEC 60320 connector guide →
9
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
Made to orderColor — Black
Length — 10 Feet
Made to orderColor — Black
Length — 2 Feet
About IEC 60320 C20 C19 ANGLED Power Cords
Looking for the IEC 60320 C14 to C13 Angled cords instead? Check out our IEC60320 C13 to C14 PDU Style Angled Power Cords page.
Angled power cords are helpful in scenarios where the PDU is mounted vertically on the rack. Have an angled plug in these situations decreases the chance that someone walking by will accidentally hit the plug and remove it from the PDU, also in tight installations a standard connector/plug will not fit. We offer both left angled and right angled applications to best suite your needs. We also offer a variety of standard lengths ranging from 1' to 15'. The standard wire gauge we offer for Angled C20/C19 cords is 12. Standard color is black.
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Plug · IEC 60320
IEC 60320 C20
- 20 Amps
- 250 volts
On 9 of the cords here
The IEC 60320 C20 is a grounded 3 Wire Plug rated up to 250V and 20 Amps. The C20 mates with a C19 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C20 is in a jumper cable scenario, providing power from a PDU to a blade server chassis, high powered server, large network router, or similar device.
Mates with IEC 60320 C19 Outlet
Connector · IEC 60320
IEC 60320 C19 Left Angle
- 20 Amps
- 125/250V
On 6 of the cords here (67%)
The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate. With the ground at 12:00 and looking at the back of the C19 (when plugged in), the cord exits at 9:00 (to the left)
Mates with IEC 60320 C20 Inlet
You are on the C19 Left Angle family page.
Connector · IEC 60320
IEC 60320 C19 Right Angle
- 20 Amps
- 125/250V
On 3 of the cords here (33%)
The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate. With the ground at 12:00 and looking at the back of the C19 (when plugged in), the cord exits at 3:00 (to the right)
Mates with IEC 60320 C20 Inlet
You are on the C19 Right Angle family page.
About IEC 60320 C20 C19 ANGLED Power Cords
World Cord Sets supplies iec 60320 c20 c19 angled power cords from our East Windsor, Connecticut headquarters, with manufacturing across US and overseas facilities. Cords are tested and certified to spec before shipment. We stock 9+ configurations and build custom cords to order — hand-terminated builds from in-stock components typically ship in 3–4 business days. In-stock orders placed by 2:30 PM ET ship the same day from our Connecticut warehouse.
Current rating
20 Amps
Voltage rating
250 volts
Plug (male end)
IEC 60320 C20
Certifications & compliance
- RoHS
- UL
- cUL
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.