Skip to content
World Cord Sets

C15 to OPEN (WHIPS PIGTAILS)

15 Amps250 voltsC15

Reference guide:IEC 60320 connector guide →

11

configurations

Not sure which cord you need?

Answer a few quick questions and we’ll narrow it down for you.

Match by picture

About C15 to OPEN (WHIPS PIGTAILS)

C15 to Open (Whips, Pigtails, ROJ) Hard Wired Power Supply Cords are used to connect a hard wire power source to a device with a C16 inlet. Our Open Ended Power Supply Cords come standard with a 2" ROJ and a 1/4" Strip. If you require a different length, please contact us for a quote. These power supply cords are available with 18awg, 16awg, or 14awg conductors and come standard with an SJT (Service Junior Thermoplastic) Outer Jacket. If you require a different jacket type, please contact us.

Related collectionsC19/ROJ 15C13/ROJ 46

The plugs and connectors in this collection

What each end is, what it mates with, and where to find every cord built on it.

  • IEC 60320 C15 connector

    Connector · IEC 60320

    IEC 60320 C15

    • 15 Amps
    • 125/250V

    On 11 of the cords here

    The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.

    Mates with IEC 60320 C16 Inlet

    Shop all IEC 60320 C14 C15 Power Cords →

About C15 to OPEN (WHIPS PIGTAILS)

More Information about IEC 60320 C15 to Open Ended (ROJ + Strip) Hard Wired Power Supply Cords

Current rating

15 Amps

Voltage rating

250 volts

Connector (female end)

IEC 60320 C15

Certifications & compliance

  • UL
  • cUL
  • RoHS
  • REACH
  • Every cord we build is hi-pot tested
  • Same-day shipping by 2:30 PM ET
  • NET 30/60/90 for approved accounts
  • In-house engineering and compliance support

Frequently asked questions

What certifications do these power cords carry?
UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
Do you require a minimum order quantity?
No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
Can I get a custom length or color?
Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
How fast does this ship?
In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.