Hospital Grade NEMA Power Cords
Reference guide:NEMA connector guide →
8
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
Made to orderColor — Clear
Length — 6 Feet
- Made to order
Color — Clear
Length — 6 Feet
- Made to order
Color — Clear
Length — 6 Feet
Made to orderColor — Gray
Length — 5.0 meters
About Hospital Grade NEMA Power Cords
Hospital grade standards
Hospital Grade Standards require Plugs, Connectors, Receptacles and Power Cords used in medical applications to have a green dot prominently displayed on the housing surface to identify compliance with Underwriter Laboratories specifications UL817, UL60601-1 and UL498. Specifically; (1) the blades must be solid instead of folded brass, (2) the blades are usually nickel-plated, (3) the plug includes an internal cable retention device or strain relief to prevent any stress to the plug’s internal connections and (4) NEMA plug and receptacle are marked “Hospital-grade” and with a green dot.
Testing procedures for hospital grade plugs and connectors
HG Test: Impact Test - A plug or connector wired with the minimum size flexible cord is subjected to an impact from a 10 pound cylindrical weight having a flat face with a 2 inch diameter dropped from a height of 18 inches. After the test, there shall be no breakage or other damage that may affect the function of the device. HG Test: Mechanical Drop Test - The cord connector is wired to #18 AWG flexible cord and suspended horizontally. It is released so it impacts a hardwood surface 45 inches below the point of suspension. This is repeated for 1,300 cycles. After the test, there shall be no breakage, deformation or other effect that may interfere with the function of the device. HG Test: 500 Pound Crush Test - A wired plug or connector is placed between two hardwood slabs while subjected to a force which is progressively increased to 500 pounds. After the test, there shall be no breakage, deformation or other effect that may interfere with the function of the device. HG Test: Strain Relief Test - While assembled to a plug or connector but not wired to the terminals; the cord must remain securely fastened after a straight pull of 30 pounds and a rotary motion within 3 inch circles with a 10 pound force applied for two consecutive hours. Displacement of conductors, insulation and outer jacket of the flexible cord shall not exceed 0.031 inch. There shall be no cuts, rips or tears in the insulation of the cord.
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Plug · NEMA
NEMA 5-15P Hospital Grade
- 15 Amps
- 125 volts
On 8 of the cords here
Hospital Grade NEMA 5-15P Power Cords are rated up to 125V and 15A. It is required that “patient care equipment” used in the “patient vicinity” use hospital-grade attachment plugs. These plugs will have a green dot displayed on the Plug Head.
Mates with NEMA 5-15R Outlet
You are on the NEMA 5-15P Hospital Grade family page.
Connector · IEC 60320
IEC 60320 C13
- 15 Amps
- 125/250V
On 7 of the cords here (88%)
The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer.
Mates with IEC 60320 C14 Inlet
Connector · IEC 60320
IEC 60320 C13 Right Angle
- 15 Amps
- 125/250V
On 1 of the cords here (13%)
The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer. With the ground at 12:00 and looking at the back of the C13 (when plugged in), the cord exits at 3:00 (to the right).
Mates with IEC 60320 C14 Inlet
About Hospital Grade NEMA Power Cords
General Information on "Hospital Grade"
Hospital Grade (HG) Standards
Hospital Grade Standards require Plugs, Connectors, Receptacles and Power Cords used in medical applications to have a green dot prominently displayed on the housing surface to identify compliance with Underwriter Laboratories specifications UL817, UL60601-1 and UL498. Specifically; (1) the blades must be solid instead of folded brass, (2) the blades are usually nickel-plated, (3) the plug includes an internal cable retention device or strain relief to prevent any stress to the plug’s internal connections and (4) NEMA plug and receptacle are marked “Hospital-grade” and with a green dot.
Testing (Plug and Connector)
HG Test: Impact Test - A plug or connector wired with the minimum size flexible cord is subjected to an impact from a 10 pound cylindrical weight having a flat face with a 2 inch diameter dropped from a height of 18 inches. After the test, there shall be no breakage or other damage that may affect the function of the device.
HG Test: Mechanical Drop Test - The cord connector is wired to #18 AWG flexible cord and suspended horizontally. It is released so it impacts a hardwood surface 45 inches below the point of suspension. This is repeated for 1,300 cycles. After the test, there shall be no breakage, deformation or other effect that may interfere with the function of the device.
HG Test: 500 Pound Crush Test - A wired plug or connector is placed between two hardwood slabs while subjected to a force which is progressively increased to 500 pounds. After the test, there shall be no breakage, deformation or other effect that may interfere with the function of the device.
HG Test: Strain Relief Test - While assembled to a plug or connector but not wired to the terminals; the cord must remain securely fastened after a straight pull of 30 pounds and a rotary motion within 3 inch circles with a 10 pound force applied for two consecutive hours. Displacement of conductors, insulation and outer jacket of the flexible cord shall not exceed 0.031 inch. There shall be no cuts, rips or tears in the insulation of the cord.
Who Needs Hospital Grade Power Cords — and Why the Green Dot Matters
The patient vicinity — defined as the area within 6 feet of a patient bed or treatment zone — requires power cords and attachment plugs that meet a higher mechanical and electrical standard than ordinary commercial cords. Regulatory bodies and hospital biomedical engineering departments specify hospital grade (HG) cords to reduce the risk of plug failure, arcing, or accidental disconnection near vulnerable patients.
Common applications
- Bedside monitors, infusion pumps, and ventilators
- Portable diagnostic and imaging equipment
- Medical-grade IT equipment in clinical environments
- Any device plugged into a hospital-grade receptacle (NEMA 5-15R HG)
How to identify a compliant cord
Look for the green dot molded into the plug face — the universal UL mark of hospital grade compliance. Cords in this collection also carry cUL listing for Canadian facilities and RoHS compliance for environmentally regulated procurement programs.
Specifying the right cord
Match wire gauge to the device's rated current: 18 AWG for loads up to 10 A, 16 AWG for up to 13 A, and 14 AWG for full 15 A circuits. When equipment is rack-mounted or space is tight, the right-angle C13 variant keeps cords routed cleanly without stressing the connector.
Related
Current rating
10–15 Amps
Voltage rating
125 volts
Plug (male end)
NEMA 5-15P Hospital Grade
Certifications & compliance
- RoHS
- UL
- cUL
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What does 'hospital grade' mean on a power cord?
- A hospital grade power cord carries a green dot on the plug housing, indicating compliance with UL specifications UL817, UL60601-1, and UL498. These cords are required for patient-care equipment used in the patient vicinity. Key construction differences from standard cords include solid (not folded) brass blades, nickel-plated contacts, and an internal strain-relief device that prevents stress on internal connections.
- Are these cords approved for use in Canada as well as the United States?
- Yes. Every hospital grade cord in this collection carries both UL (United States) and cUL (Canada) listings, so a single SKU satisfies procurement requirements in both countries. The cords are also approved for use in several additional North American and Caribbean markets including Barbados, Costa Rica, the Dominican Republic, Ecuador, and others.
- What amperage and wire gauge options are available?
- The collection currently offers three current ratings:10 A — 18 AWG SJT13 A — 16 AWG SJT15 A — 14 AWG SJTAll cords are rated at 125 V and use a NEMA 5-15P Hospital Grade plug. A right-angle IEC 60320 C13 connector variant is also available for space-constrained installations.
- Can I order hospital grade power cords in bulk or on a B2B account?
- Yes. World Cord Sets serves OEMs, resellers, and healthcare facilities with NET 30/60/90 terms for approved accounts. Blanket orders, blind drop-ship, and private-label programs are available. Every cord is hi-pot tested before shipment. Contact us or use the Instant Quote tool for volume pricing.