Skip to content

Black High Temp NEMA L6-20P to IEC320 C15 15A 250V

15 Amps250 voltsNEMA L6-20PC15RoHSULcUL

Reference guide:IEC 60320 connector guide →

4

configurations

Not sure which cord you need?

Answer a few quick questions and we’ll narrow it down for you.

Match by picture

About Black High Temp NEMA L6-20P to IEC320 C15 15A 250V

NEMA L6-20P to IEC 60320 C15 Power Cords are rated up to 250V and 15A. We offer STANDARD lengths. Standard color is Black. Standard wire gauge is 14AWG. The NEMA L6-20P will lock into place to prevent any nuisance unplugging. It is commonly found in industrial and commerical setting where there is a power drop from the ceiling in the form of a L6-20R Connector that is wired into a junction box on the ceiling. The C15 is designed for the same Mid Range Power Draw as the C13, however it is also rated for higher temperature applications. So this cord is useful for things like IT Servers in Data Centers that can produce lots of heat when running at max capacity.

The plugs and connectors in this collection

What each end is, what it mates with, and where to find every cord built on it.

  • IEC 60320 C15 connector

    Connector · IEC 60320

    IEC 60320 C15

    • 15 Amps
    • 125/250V

    On 4 of the cords here

    The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.

    Mates with IEC 60320 C16 Inlet

  • NEMA L6-20P plug

    Plug · NEMA

    NEMA L6-20P

    • 20 Amps
    • 250 volts

    On 4 of the cords here

    THE NEMA L6-20P is a 3 Wire 3 Blade grounded device with hot-hot-ground wiring and is rated up to 250V AC and 20 Amps.

    Mates with NEMA L6-20R Outlet

About Black High Temp NEMA L6-20P to IEC320 C15 15A 250V

General Information

The NEMA 6-20P is a 3 Wire grounded plug featuring two blades and one ground pin rated up to 250V AC and 20 Amps. The NEMA 6-20P has one horizontal blade and one vertical blade and mates with a 6-20R Outlet.

The IEC 60320 C15 CONNECTOR (FEMALE) is a grounded 3 Wire connector rated up to 250V & 10 Amps Internationally and 125V/250V & 15 Amps in North America. The C15 mates with a C16 inlet as well as a C14 Inlet and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C15 is a HIGH TEMPERATURE connector rated up to 120°C, unlike the 70°C rating of the C13. The C15 is commonly used in in electric kettles and other household appliances that involve higher temperatures than a normal C13 is made to withstand.

This cord is commonly used with the Cisco 3850 Switch.

Current rating

15 Amps

Voltage rating

250 volts

Plug (male end)

NEMA L6-20P

Connector (female end)

IEC 60320 C15

Certifications & compliance

  • RoHS
  • UL
  • cUL
  • Every cord we build is hi-pot tested
  • Same-day shipping by 2:30 PM ET
  • NET 30/60/90 for approved accounts
  • In-house engineering and compliance support

Frequently asked questions

What certifications do these power cords carry?
UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
Do you require a minimum order quantity?
No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
Can I get a custom length or color?
Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
How fast does this ship?
In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.