Single Mode Fiber Patch Cables
Reference guide:Cat5e vs Cat6 vs Cat6a comparison →
50
configurations
Singlemode Fiber has a higher attenuation than Multimode, however the bandwidth and length capabilities are much higher. Our Singlemode Fiber comes in a duplex form, which allows two lanes of communications for each direction in patch applications. All of our SM Fiber has a G.657.A1 Grade (bend-insensitive fiber) which allows for lower bend radius without compromising signal. This is done by surrounding the core with an optical trench that reflects stray light back into the core. Singlemode fiber utilizes Muliplexing or MUX/DEMUX technology which allows for increased data transmission through the use of one fiber strand.
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
Made to orderColor — Yellow
Length — 1.0 meter
- Made to order
Color — Yellow
Length — 2.0 meters
- Made to order
Color — Yellow
Length — 3.0 meters
Made to order
Made to order- Made to order
- Made to order
- Made to order
Color — Yellow
Length — 5.0 meters
Made to order
Made to order
Made to order
Made to order
Made to order- Made to order
Color — Yellow
Length — 10 Feet
- Made to order
Color — Yellow
Length — 10 Feet
- Made to order
- Made to order
- Made to order
- Made to order
- Made to order
Color — Yellow
Length — 7.0 meters
- Made to order
Color — Yellow
Length — 13 Feet
- Made to order
Color — Yellow
Length — 10 Feet
- Made to order
Color — Yellow
Length — 10 Feet
- Made to order
Color — Yellow
Length — 10 Feet
- Made to order
Color — Yellow
Length — 10 Feet
- Made to order
Color — Yellow
Length — 16 Feet
- Made to order
Color — Yellow
Length — 16 Feet
- Made to order
Color — Yellow
Length — 25 Feet
- Made to order
Color — Yellow
Length — 23 Foot
- Made to order
Color — Yellow
Length — 16 Feet
- Made to order
Color — Yellow
Length — 16 Feet
- Made to order
Color — Yellow
Length — 16 Feet
- Made to order
Color — Yellow
Length — 10.0 meters
- Made to order
Color — Yellow
Length — 33 Foot
- Made to order
Color — Yellow
Length — 33 Foot
- Made to order
- Made to order
Color — Yellow
Length — 15.0 meters
- Made to order
Color — Yellow
Length — 15.0 meters
- Made to order
Color — Yellow
Length — 35 Feet
- Made to order
Color — Yellow
Length — 33 Foot
- Made to order
Color — Yellow
Length — 50 Feet
- Made to order
Color — Yellow
Length — 50 Feet
- Made to order
Color — Yellow
Length — 50 Feet
- Made to order
Color — Yellow
Length — 50 Feet
- Made to order
Color — Yellow
Length — 66 Foot
- Made to order
Color — Yellow
Length — 66 Foot
- Made to order
Color — Yellow
Length — 82 Foot
- Made to order
Color — Yellow
Length — 82 Foot
- Made to order
Color — Yellow
Length — 2.5 meters
- Made to order
Color — Yellow
Length — 2.5 meters
Related reading
Fiber Optics: The new benchmark for Fiber Optics - OM5
The Data world advances at a staggering rate, if you are not up to date on the latest technology your data center build will lag behind the...
Fiber Optics · 1 min read
Fiber Optics: Wavelengths used in Fiber Optics
Fiber Optics can be a complex topic of discussion. It is hard to believe that something like a movie can be transmitted to us over a beam of...
Fiber Optics · 4 min read
Fiber Optics: Cable Jacket & Fire Rating
Due to the fragility of the Fiber Optic Core, and the sensitivity of light transmitting through the core to even the slightest imperfections...
Fiber Optics · 3 min read
Fiber Optics: Single Mode Fiber
Fiber Optics can be classified by Singlemode and Multimode Fiber. Each has different pros and cons, however due to the bandwidth and distanc...
Fiber Optics · 5 min read
Fiber Optics: Wavelength Division Multiplexing (WDM) Explained
Fiber Optic Technology has revolutionized how data is transmitted. In this article, we aim to break down the different types of wavelength...
Fiber Optics · 5 min read
Fiber Optics: Limiting Factors
Fiber optics is currently the most effective way of transmitting data, although there are some factors in play that can limit the quality of...
Fiber Optics · 5 min read
About Single Mode Fiber Patch Cables
World Cord Sets supplies single mode fiber patch cables from our East Windsor, Connecticut headquarters, with manufacturing across US and overseas facilities. Cords are tested and certified to spec before shipment. We stock 50+ configurations and build custom cords to order — hand-terminated builds from in-stock components typically ship in 3–4 business days. In-stock orders placed by 2:30 PM ET ship the same day from our Connecticut warehouse.
Certifications & compliance
- UL
- cUL
- RoHS
- REACH
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.