Switzerland
13
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
In stock (139)Color — Black
Length — 6 Feet
Made to orderColor — Black
Length — 6 Feet
Made to orderColor — Black
Length — 6 Feet
Made to orderColor — Black
Length — 2.5 meters
Made to orderColor — Black
Length — 2.5 meters
Made to orderColor — Black
Length — 2.5 meters
Made to orderColor — Black
Length — 3.0 meters
Made to order250 voltsESTIRoHSColor — Black
Length — 25 Feet
Made to orderColor — Black
Length — 2.5 meters
Made to orderColor — Black
Length — 2.5 meters
About Switzerland
Swiss Power Cords
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Plug · International
Switzerland SEV 1011 3-Pin 10A (M) Type J
- 10 Amps
- 250 volts
On 9 of the cords here (69%)
The SEV 1011 3 pin plug configuration is rated for 250VAC and 10 Amperes in Switzerland. This configuration is also classified as IEC type J, and is the standard low power plug type in Switzerland. The pins of the 10 amp plug type are circle shaped and slightly smaller diameter, allowing them to be plugged into both the 10 amp and 16 amp receptacle types.
Mates with SEV 1011 3P 10A Outlet
You are on the Switzerland SEV 1011 3-Pin 10A (M) Type J family page.
Connector · IEC 60320
IEC 60320 C13
- 15 Amps
- 125/250V
On 3 of the cords here (23%)
The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer.
Mates with IEC 60320 C14 Inlet
Connector · IEC 60320
IEC 60320 C7
- 10 Amps
- 125 volts
On 2 of the cords here (15%)
The IEC 60320 C7 is an ungrounded 2 Wire connector rated up to 250V and 2.5 Amps Internationally or 125V and 10 Amps in North America. The C7 mates with a C8 inlet, and is commonly used for laptop power supplies, video game consoles, televisions, and other double-insulated small appliances. This connector is sometimes referred to as a "Figure-8" or "Shotgun" connector due to it's shape. A variation of the C7 exists, sometimes referred to as a C7P or C7 Polarized, although it is not documented in the IEC 60320 standard. The C7P has one square side and one circular side so the connector only mates with the inlet using the correct pin configuration.
Mates with IEC 60320 C8 Inlet
Connector · IEC 60320
IEC 60320 C19
- 20 Amps
- 125/250V
On 2 of the cords here (15%)
The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.
Mates with IEC 60320 C20 Inlet
Plug · International
Europe CEE7/16 2Pin 2.5A 250V
- 2.5 Amps
- 250 volts
On 2 of the cords here (15%)
The CEE7/16 2 pin plug configuration is rated for 250VAC and 2.5Amps. It is commonly refered to as the "Euro-plug" and is one of the most widely used plug types around the world. The common application is for powering smaller devices throughout Europe, since the plug type is only rated for 2.5 amperes.
Mates with Schuko CEE7/7 Outlet
You are on the Europe CEE7/16 2Pin 2.5A 250V family page.
Plug · International
Switzerland SEV 1011 3-Pin 16A (M) Type J
- 16 Amps
- 250 volts
On 2 of the cords here (15%)
The SEV 1011 3 pin 16a plug type configuration is rated for 250VAC and 16 Amperes of power in Switzerland. It is also classified under the IEC type J type. The pins are square shaped and slightly larger than the 10 amp plug type pins. This prevents backwards compatibility and prevents electrical hazard.
Mates with SEV 1011 3P 16A Outlet
You are on the Switzerland SEV 1011 3-Pin 16A (M) Type J family page.
About Switzerland
World Cord Sets supplies switzerland from our East Windsor, Connecticut headquarters, with manufacturing across US and overseas facilities. Cords are tested and certified to spec before shipment. We stock 13+ configurations and build custom cords to order — hand-terminated builds from in-stock components typically ship in 3–4 business days. In-stock orders placed by 2:30 PM ET ship the same day from our Connecticut warehouse.
Current rating
2.5–16 Amps
Voltage rating
250 volts
Certifications & compliance
- VDE
- RoHS
- ESTI
- DEMKO
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.