Skip to content
World Cord Sets

Italy

2.5–16 Amps250 voltsVDERoHSENECKEMA

15

configurations

Not sure which cord you need?

Answer a few quick questions and we’ll narrow it down for you.

Match by picture
All 15 part numbers in Italy — every color and length, one link each

About Italy

Italy Power Cords

The plugs and connectors in this collection

What each end is, what it mates with, and where to find every cord built on it.

  • Italy CEI 23-50 3-Pin 10A plug

    Plug · International

    Italy CEI 23-50 3-Pin 10A

    • 10 Amps
    • 250 volts

    On 9 of the cords here (60%)

    The CEI 23-50 10A plug type configuration is rated for 250VAC and 10 Amps in Italy and is also classified as the international type L plug. The 10A configuration is smaller than the 16 amp configuration to prevent connection the 16 amp plug type into a 10 amp receptacle, which is an electrical hazard.

    You are on the Italy CEI 23-50 3-Pin 10A family page.

  • Italy CEI 23-50 3-Pin 16A Type L plug

    Plug · International

    Italy CEI 23-50 3-Pin 16A Type L

    • 16 Amps
    • 250 volts

    On 4 of the cords here (27%)

    The CEI 23-50 3 Pin 16A plug type configuration is rated for 250VAC and 16Amps in Italy. It is also classified as the type L plug type and is the standard plug type for general appliances in Italy.

    Mates with CEI 23-50/ CEI 23-16 16A Outlet

    You are on the Italy CEI 23-50 3-Pin 16A Type L family page.

  • IEC 60320 C13 connector

    Connector · IEC 60320

    IEC 60320 C13

    • 15 Amps
    • 125/250V

    On 3 of the cords here (20%)

    The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer.

    Mates with IEC 60320 C14 Inlet

    Shop all IEC 60320 C14 C13 Power Cords →
  • IEC 60320 C5 connector

    Connector · IEC 60320

    IEC 60320 C5

    • 10 Amps
    • 250 volts

    On 2 of the cords here (13%)

    The IEC 60320 C5 is a grounded 3 Wire connector rated up to 250V and 2.5 Amps Internationally or 125V and 10 Amps in North America. The C5 mates with a C6 inlet, and is commonly used for laptop power supplies, projectors, and some televisions. Being slightly smaller in size than the C13, the C5 can be a good choice for smaller appliances. This connector is sometimes referred to as a "Mickey Mouse" connector due to the shape of the connector looking similar to the kids television show character.

    Mates with IEC 60320 C6 Inlet

    Shop all IEC 60320 C14 C5 Power Cords →
  • IEC 60320 C7 connector

    Connector · IEC 60320

    IEC 60320 C7

    • 10 Amps
    • 125 volts

    On 2 of the cords here (13%)

    The IEC 60320 C7 is an ungrounded 2 Wire connector rated up to 250V and 2.5 Amps Internationally or 125V and 10 Amps in North America. The C7 mates with a C8 inlet, and is commonly used for laptop power supplies, video game consoles, televisions, and other double-insulated small appliances. This connector is sometimes referred to as a "Figure-8" or "Shotgun" connector due to it's shape. A variation of the C7 exists, sometimes referred to as a C7P or C7 Polarized, although it is not documented in the IEC 60320 standard. The C7P has one square side and one circular side so the connector only mates with the inlet using the correct pin configuration.

    Mates with IEC 60320 C8 Inlet

    Shop all IEC 60320 C14 C7 Power Cords →
  • IEC 60320 C19 connector

    Connector · IEC 60320

    IEC 60320 C19

    • 20 Amps
    • 125/250V

    On 2 of the cords here (13%)

    The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.

    Mates with IEC 60320 C20 Inlet

    Shop all IEC 60320 C20 C19 Power Cords →

About Italy

World Cord Sets supplies italy from our East Windsor, Connecticut headquarters, with manufacturing across US and overseas facilities. Cords are tested and certified to spec before shipment. We stock 15+ configurations and build custom cords to order — hand-terminated builds from in-stock components typically ship in 3–4 business days. In-stock orders placed by 2:30 PM ET ship the same day from our Connecticut warehouse.

Current rating

2.5–16 Amps

Voltage rating

250 volts

Certifications & compliance

  • VDE
  • RoHS
  • ENEC
  • KEMA
  • Every cord we build is hi-pot tested
  • Same-day shipping by 2:30 PM ET
  • NET 30/60/90 for approved accounts
  • In-house engineering and compliance support

Frequently asked questions

What certifications do these power cords carry?
UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
Do you require a minimum order quantity?
No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
Can I get a custom length or color?
Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
How fast does this ship?
In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.