Standard IEC320 C14 to IEC320 C13 10A 250V
146
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
In stock (139)Color — Black
Length — 1 Foot
About Standard IEC320 C14 to IEC320 C13 10A 250V
IEC 60320 C13 CONNECTOR (FEMALE)
The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. However, the cables/cord sets in this category are rated at 10A due to the use of a thinner 18awg cordage only rated to 10A. If you are looking for a C14 to C13 cord set rated out other amperages, please check our main page at IEC C14 C13 Power Cables The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer. The C13 is commonly found with 18awg, 3c SJT cordage, 16awg-3c SJT cordage, or 14awg-3c SJT cordage.
IEC 60320 C14 CONNECTOR (MALE)
The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The cord sets in this category are rated at 10A due to the use of 18awg cordage. The reason for using 18awg cordage is to reduce cost, reduce the size, and to help increase airflow in a dense installation by reducing the volume of cabling in the rack. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario, providing power from a PDU to IT Equipment. The C14 is commonly found with 18awg, 3c SJT cordage, 16awg-3c SJT cordage, or 14awg-3c SJT cordage.
Which of these cables is the "standard" configuration?
The most common configuration found is the 10A, C14 to C13, 3FT & 6FT, with 18awg-3c SJT cable in Black. The reason this is the most common configuration found is these are standard lengths that are used in data center racks, and, the 10A variety is the cheapest version of this cable available. Most IT equipment does not require more than 10A (especially if operating at 208V). However, ensure you device does not require 13A or 15A cables.
1413-F-036 - C14 to C13, 10A, 250V, Black Power Cable, 3FT
1413-F-072- C14 to C13, 10A, 250V, Black Power Cable, 6FT
What are the primary uses for C14 to C13 power cables?
C14 to C13 power cables are the standard power cable used in the data center for distributing power inside of the rack. Typically, each rack is configured with 2 Power Distribution Units (PDUs) fed from two different power sources for redundancy. Each PDU will have C14 outlets, allowing you to plug the C14 end of this cable into the PDU, and, the C13 end of this cable into the Power Supply Unit (PSU) on the server.
| (1) Rack Mount PDU | Rack Mounted PDUs are the standard way to distribute power to many devices in a rack. WoCo C14 C13 power cables mate perfectly will all brands of PDU including APC, Raritan, Server Technology and more. |
| (2) C14 Plug (Male) | The C14 plug on this power cable will mate with any C13 Outlet. The standard C14 does not feature a locking mechanism. |
| (3) C13 Connector (Female) | The C13 connector will mate with a matching C14 inlet, typically found on servers, routers, switches, and your standard desktop computer. |
| (4) Server, Router, Switch, Computer, Equipment | Many small appliances use a C14 inlet to provide power to the PSU (Power Supply Unit). Our C13 connectors will mate with any C14 inlet on your small appliance. |
These are not only found in the data center however, they can also be used as an extension cable, typically to extend the length of a NEMA 5-15P (standard North American wall outlet plug) to C13 cable. The C13 plug on this cable fits into the C13 connector of the original cable, making the cable longer.
Current rating
10 Amps
Voltage rating
250 volts
Plug (male end)
IEC 60320 C14
Connector (female end)
IEC 60320 C13
Certifications & compliance
- UL
- cUL
- RoHS
- REACH
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.